Valentine's Day Tea Towel - Easy Iron-On Project
Elegant and Easy Iron-On Project
Make this easy iron-on project with your Cricut! This Valentine's Day Tea Towel is so cute and it will fit with any DIY Home Decor! Imagine making a few of these to hang in your kitchen and you can even add a banner across the kitchen window to really make Valentine's Day special (our Valentine's Day Banner - asset #308) and also making this easy Valentine's Day Banner at the same time. You can even add your own sayings!
All the materials can be items you already have on hand. You will also find the template already to go in my resource library (asset #309)
Here’s what you need to make your Valentine's Day Tea Towel. This post does contain some affiliate links for your convenience (which means if you make a purchase after clicking a link I will earn a small commission but it won’t cost you a penny more)! Read my full disclosure policy.
Valentine's Day Tea Towel Step-by-Step Guide
Step Two - Design Space Changes
In Design Space you will want to adjust the sizing to fit your tea towel.
Go to the templates in Design Space and find a template that closely resembles your tea towel and select it.
This will give you a template on your Canvas to act as a guide when sizing your project.
Please note: Templates do not cut or print with your project, they act a a guide only.
After you click on Make it, make sure you mirror your design, especially if you used words. This is something that is easy to forget to do. So please, double-check your work.
Now go ahead and cut your design.
Step Three - Ironing on the Design
Look up the heat guide for your type of vinyl and your surface. For example, you could look up Terry Towel and Patterned Iron-on to get the right temperature and time for ironing-on your design.
If you have layers, iron on one layer at a time but make sure you protect the underneath layer so it does not bleed through on get stuck on your iron.
Step Four - The Finishing Touches
Wait for your design to cool if you used a cool peel and then take off the protective layer.
If it is a warm-peel, you will still need to let the design cool a bit.
If your design will not peel properly, wait a little bit longer to see if it peels. If you are still having issues, press it on again.
Share your project in our Facebook group. https://Facebook.com/groups/BettesMakes
This Valentine's Day Tea Towel is an easy project, especially good when you are just starting out. The best part was the fact that you were able to use the Heat Guide provided by Cricut. The heat guide certainly makes it easier to get the right heat and even if your material does not release as it should, you can always heat it again.
I hope you enjoyed this project as much as I did.
If you made a card, please share it on our Facebook group. https://Facebook.com/groups/BettesMakes
Until next time,